8.6. Fire Procedure – Evacuation

– Electrically locked security doors
o Lock will auto release when the alarm activates, just push the door open
o Break glass release button only if door does not unlock
o If you break glass notify the Porters or the Buildings Manager for replacement

– People with disabilities
o Need to be assisted by volunteers or nominated personnel, detail will be available in their Personal Emergency Evacuation Plans (PEEP’s)

– On exiting the building
o Report to designated assembly point promptly
o Don’t block any Emergency Services route to the building.
o Report any missing colleagues to your Fire Warden
o Report any disabled persons left at Refuge Points
o Remain at assembly point until advised otherwise
o Do not wander off as it may be assumed that you are trapped in the building

If you fight a fire using a fire extinguisher, remember the word PASS

PULLPULL the pin. Some extinguishers require releasing a lock latch, pressing a puncture lever or other motion.
AIMAIM low, pointing the extinguisher nozzle (or it’s horn or hose) at the base of the fire.
SQUEEZESQUEEZE the handle. This releases the extinguishing agent.
SWEEPSWEEP from side to side at the base of the fire until it appears to be out. 

Watch the fire area in case fire breaks out again, and repeat use of extinguisher if necessary.

Read and follow the directions on your extinguisher. If you have the slightest doubt about whether or not to fight a fire – DON’T!